close

How silicone price,neon wristbands for events

, so the products produced appear performance defects and practical function is reduced . Some customer are holding ready-made products for Soft-hardness comparison directly and then choose one of them . In nowadays the custom silicone bracelets is one of them. So how to choose the hardness for custom silicone bracelets . The choice of softness and hardness of silica gel will have different effects on the properties of different products . At present, the hardness of commonly used silica gel hand rings is between 40 degrees and 60 degrees and material with different hardness has certain difference . For example , the tensile rate of 40 degree materials will reach about 150% , and the tensile rate 60 degree materials can only reach about 80% . So in order to confirm the functionality of products , we have to test them . It is more difficult to produce high hardness silica gel hand rings . For the manufacturers of silica gel hand rings , the higher the hardness , the higher the defective rate of the products and the pulling force of the products will also be affected and will cause fracture phenomenon at any time . Therefore , we suggest that the hardness of the silica gel hand rings should not be too high .      

r. Among them, no big-name stars use it as their decorations, making you cool and full of flavor! As for the production process of silicone wristband, it is estimated that not many people have fully understood it. Pinshang Silicone explains the whole production process of silicone wristband. Design of artwork The design of artwork is generally based on the size of the sample artwork provided by the customer. Graphic drawing software, such as CDR or AI software, is generally used to make the artwork. If the customer cannot provide the sample artwork, we can cooperate with the customer to complete the design and production of the artwork free of charge according to the customer"s requirements. Open mold The mold opening is that the mold master creates an offset plate according to the designed artwork, then uses the offset plate to carve a copper worker, and finally carves a steel mold with the copper worker. Some hand ring craft moulds have a relatively high technical content and take a relatively long time to produce. Generally, the mold opening period is calculated by five days. With the mould, the production willneon wristbands for events be quick. Toner refining According to the color number on the international Pantone color card specified by the customer, our color mixing ratio is aligned and the color difference is minimal. Approval materials The materials required for each wristband are weighed by an electronic scale. Generally, the wristband weighs about 5.5 grams. Upper die production After the mould is finished, it is produced on the machine. After the mold is installed, the machine needs to be warmed up. A 9-mold machine produces about 15000 pieces per day. Quality inspection After the wristband is produced, the product shall be inspected and checked, mainly to see if it meets the specifications. If it does not meet the specifications, it will be discarded. deburring Each wristband is produced with a residual edge. After the quality inspection department passes the inspection, the product is sent to the post-process department for trimming. (Average trimming quantity per person per day is about 3,000 pieces). Finished product inspection After the edge is repaired, the finished product is obtained. It is also necessary to send the finished products back to the quality inspection department to check the trimming quality. If there are any unqualified products, they will be scrapped. Packaging After the repaired products pass the inspection, they shall be packaged according to the customer"s requirements. Packaging is divided into PP bag independent packaging and naked packaging. Both are 100 pieces in a pack. Usually 20 packs per carton (2,000 pieces) are standard export containers. Packing is generally required by customers. Inspection before sealing After the packaging is completed, the quality inspection department will check the quantity. if there is no problem, seal the case and send it to the warehouse for delivery.             silicone-wristbands-size-chart

neon wristbands for eventswristbands" alt="how to make wristbands" src="https://www.24hourwristbands.ca/upload/2019/20190410/170107_8074.png" width="350" height="350">


https://twassad.weebly.com/4159685.html
https://twlkjabuewbdqwd.weebly.com/4126920.html
https://twjkiohfg.weebly.com/9091743.html
https://twdertgfred.weebly.com/4078168.html
https://munieniu.weebly.com/184589.html
https://twkgjhutnk.weebly.com/1783761.html
https://twkenaxg.weebly.com/7086392.html
https://twkjnkjnkj.weebly.com/7326247.html
https://twertgfvbnhj.weebly.com/3284092.html
https://twjghytujhnbm.weebly.com/5351467.html